Base oil SN350, is defined as a light grade base oil in the middle of the specifications of Grade I base oils. They are mainly used in lubricant and lubricant additives production. It has been solvent refined, dewaxed, and hydrogen treated to take out impurities. This oil has no impurities or compounds that can have an adverse effect on the quality of the oil.
RAHA oil Co is one of the leading suppliers of base oil Group I according to the American Petroleum Institute (API), which contains less than 90 percent, saturates and has a viscosity index greater than or equal to 85 and less than 120
Base Oil are produced by means of solvent refining paraffinic crude oil as below, with modern production facilities and using high-quality raw materials.
Base oils are used to manufacture products including motor oil, Industrial oil, Grease, and etc.
- Mould oil
- Transmission fluids
- Gear oils
- Metalworking fluids
- Hydraulic oils
- Transformer oils
Packing of Base Oil SN 350
Base oil packed in new or used 180 kg drums, iso tank, Flexitanks, and bulk shipments. Each 20-foot container takes 80 drums.
Handling health & Safety :
Lubricants consisting of highly refined mineral oils with specification additives. In normal conditions of use, this lubricant presents no particular toxic hazard. All lubricants, of any kind should be handled with great care, particularly avoiding can contact with the skin.
Prevent any splashing, and keep away from combustible materials. Store undercover and away from any risk of pollution. Dispose of the used oil correctly; don’t pour down drains, into watercourses or the soil.